Timing issue or ?????? Update ..... found problem

Print Thread

Re: Timing issue or ?????? [Re: 70dusterjohn] #2503518 06/02/18 11:24 AM 06/02/18 11:24 AM
Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina sgcuda master
sgcuda master Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina	How did you phase the distributor? I like to drill a 3/8" hole in line with #1 in an old distributor cap and put a timing light on it to check rotor/plug wire alignment. Do you have a 4/7 swap cam and forgot about it when you reran the plug wires? Did you verify TDC timing marks before you started all of this? [image][/image]

Entire Thread
Subject	Posted By	Posted
Timing issue or ?????? Update ..... found problem	70dusterjohn	05/31/18 02:59 AM
Re: Timing issue or ??????	sgcuda	05/31/18 03:02 AM
Re: Timing issue or ??????	70dusterjohn	05/31/18 03:07 AM
Re: Timing issue or ??????	Dave Hall	05/31/18 03:15 AM
Re: Timing issue or ??????	ozymaxwedge	05/31/18 03:17 AM
Re: Timing issue or ??????	hemi-itis	05/31/18 03:24 AM
Re: Timing issue or ??????	TRENDZ	05/31/18 03:29 AM
Re: Timing issue or ??????	MR_P_BODY	05/31/18 04:11 AM
Re: Timing issue or ??????	a493demon	05/31/18 05:12 AM
Re: Timing issue or ??????	sasquatch	05/31/18 05:51 AM
Re: Timing issue or ??????	70dusterjohn	05/31/18 10:51 AM
Re: Timing issue or ??????	B3422W5	05/31/18 11:29 AM
Re: Timing issue or ??????	70dusterjohn	06/02/18 04:16 AM
Re: Timing issue or ??????	Cab_Burge	06/02/18 06:02 AM
Re: Timing issue or ??????	urdustd	06/02/18 05:09 AM
Re: Timing issue or ??????	70dusterjohn	06/02/18 02:11 PM
Re: Timing issue or ??????	Dduster	06/02/18 05:25 AM
Re: Timing issue or ??????	dvw	06/02/18 03:10 PM
Re: Timing issue or ??????	sgcuda	06/02/18 03:24 PM
Re: Timing issue or ??????	Adobedude	06/02/18 05:35 PM
Re: Timing issue or ??????	70dusterjohn	06/03/18 11:04 AM
Re: Timing issue or ??????	70dusterjohn	06/03/18 09:26 PM
Re: Timing issue or ??????	Dave Hall	06/03/18 09:32 PM

Hop To