Well I have some good news and some bad news. The good news is I got it started and running, the bad news is I don't know what I did to make it start. I swapped around a lot for fuses, relays everything that had anything to do with the start and run sequence. I opened and closed a bunch of plugins, looked at a lot of wires, didn't find any corrosion anywhere. I even pulled the starter and had it checked , still nothing. Then after some more probing it started and runs. This makes me a little leery as if it happens again i'll be out in the middle of nowhere with no idea of what to look for again. Thanks for everyone for your input