904/727 behind a 5.7 - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech 904/727 behind a 5.7

Print Thread

Re: 904/727 behind a 5.7 [Re: Kiddart] #2496960 05/16/18 09:14 PM 05/16/18 09:14 PM
Joined: May 2005 Posts: 784 Florida cbusters super stock
cbusters super stock Joined: May 2005 Posts: 784 Florida	I found out after bolting it all together that the ATI Flexplate is made for Hemi Torque Convertor bolts which is a size larger than the stock 727 convertor you will likely order. The pads will have to be specified as such and also source the 4 bolts at the same time.

Entire Thread
Subject	Posted By	Posted
904/727 behind a 5.7	Kiddart	05/15/18 07:27 PM
Re: 904/727 behind a 5.7	RTSE4ME	05/15/18 09:12 PM
Re: 904/727 behind a 5.7	Kiddart	05/16/18 01:44 AM
Re: 904/727 behind a 5.7	savoy64	05/16/18 03:41 PM
Re: 904/727 behind a 5.7	cbusters	05/17/18 01:14 AM
Re: 904/727 behind a 5.7	John_Kunkel	05/17/18 10:28 PM
Re: 904/727 behind a 5.7	HotRodDave	05/17/18 11:52 PM
Re: 904/727 behind a 5.7	biff426	05/18/18 04:19 AM
Re: 904/727 behind a 5.7	sixpackgut	05/18/18 06:32 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1