I have a motor plate for gen3 hemi that's machined with one #12 ORB size outlet/return and two #10 sized inlets. Getting ready to have a custom radiator made with Meziere WP362 mounted to it. The pump has 2 outlets -16 AN O ring threaded. So there will be some step up or down in size to the flare adaptors. So couple questions what would be recommended minimum hose sizes for the 2 inlets and the one return hose? Would -12 hose be big enough for the two inlet hoses from pump to motor? And for the top hose the return hose the -12 ORB adapted to -16 hose for the return to radiator?