I just pulled the trigger on a 16 volt Battery and Alternator and installed a Moroso Accusump solenoid on my Dart. The solenoid fried within 15 seconds.
Is the MAC Valve going to do the same thing?
I just installed a 16V to 12 volt Stepdown and got a new solenoid.
So my question is if the MAC Valve can handle 16 volts, will the shifter shift harder and quicker compared to the 12 volt setup. I can put the Valve on the step down also and be safe but would like the Valve to work better on 16 volt if possible.