I added 1" spacers between spring and isolator.

Had to remove the stud bushing and installed it over the block pin to fit into the isolator.

then added alluminium spacers too to the U bolts, between both plates, just to keep safe the isolators from being hardly smashed when tightening.

will find the pic and post.

EDITING... not easy to see, but... there is the block in between the isolator and spring and the shiny pieces are the aluminium spacers which I made and installed like somehow as a colapsible bushing to keep the isolators safe


and is true, there is a bushing on guide stud. This guide stud is also thicker than earliers ( 3/8" instead 5/16" from earliers )

I removed the top bushing and installed on top of the spacer guide.

here the non iso assembly vs the iso assembly