I don't have any good pics here. We use seat belts lathes to put them up in the latched position for sure. Just simpler easier and cleaner. My Stratus the buckles male end faces in the pass compartment to get it out of the way getting in and out. Believe me I need all the space I can get. It is really tight on ingress and egress for sure. The lower part on the Stratus is "bolted" to the door bar, how RJ did it. We used Stroud for the net as well. Who I have always used. Just need some measurements no reason for a template. My Cuda was similar except the lower was attached with a rod on the door bar that we could unbolt. Top was one latch and net swung out of the way a bit on a rod end at the top rear corner..