There was no rebuilding of the set we have that failed.
They were bought new a couple months ago as 3472-RH EZX.


My personal "opinion" at this point is, the configuration for oiling on the lifters we have is not sufficient for the bushings.

Now, if there were several people who were running these same style lifters we have, also bushed, that also have the feed holes not being pressure fed most of the time........ And not having any issues with them, that would be a step towards me changing my opinion.

I'm really not looking to point any fingers at either Isky or Comp. I'm just trying find the cause of the problem so we can avoid it happening again.