It has always bothered me that I have a steel, (built by Joey Cole) hood scoop that is not supplying air to the carbs.
I have two 750 cfm Hollys on a Marine intake. I studied the factory systems, and found that the only one with a seal on the air cleaner was an A12.
So I ordered the closest thing I could find which was a Shaker with Edelbrock carbs and a StageV intake. Of course the rear Holly carb bowl took up all the space, so I had to modify it. My goal is to build a "wa ll" like the A12,and seal the carbs to the scoop.