Quote:

---

Here is a set of fabricated ones I like. I will also mention the Indy's have a nice feature, and they have two of the attaching bolts deleted, but drilled from the inside for a stud. This is a really nice feature. The short studs remain on the heads and retain the gaskets, and really make the covers easier to remove because the deleted bolt holes are the ones on the ends (firewall side delete is the best). Really cleans up the look of the covers as well, as you will notice in the pic of my engine where they are not present. I do not like Indy's service, but some of their products I really like.

With the fabricated ones shown below, it would also be nice to delete the same two bolts per valve cover, but as mentioned, I like the fabricated ones where all the bolts are not recessed real deep into the covers. Flush would be ok, but the fender well side ones that are recessed real deep are a pain.

---