Do you know what pressures they had on the seats and opened? If so remove several and retest them to see It wouldn't surprise me at all that they have lost 20 to 30 Lbs. every where I like to use 140 to 160 Lbs. on the seats and from 325 to 375 opened on both hydraulic and solid flat tappet cams for street use with stock valves, add a tiny bit more pressure(10 to 20 lbs.) on both for larger, heavier valves
Cab, I checked my notes and I don't have the pressures listed. It was about 2007 when the heads were prepped. I was planning to use a hydraulic FT (XE284 I think) at that time so those were the specs provided to the machine shop to set up the springs. Dwayne talked me into switching to the solid cam, for which I am grateful I should add.
Thanks, Mark
Last edited by Hemi Allstate; 12/12/1709:15 PM.
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019