Looking back at some of the data on the dyno pulls, I noticed that the first few pulls where the engine peaked at higher RPM that the water temp was higher, and the left and right banks were more balanced AF numbers.
Is there a relationship to the higher RPM peaks and balanced AF numbers ? work
These were the first pulls tested above 5,000 . We made the very first pull to 5,000 as a test to be sure all looked good.

Thanks,
Mark

470 first pulls.jpg470 first pulls.jpg #2.jpg
Last edited by Hemi Allstate; 11/01/17 01:17 PM.

1996 Ram 1500 Sport
1968 road runner
1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019