I've been researching this topic also and there are so many varying opinions about the foam. Some say no problem others say its the worst thing to do, maybe as said above it depends on the quality of the cell/foam.

My plan it to go no foam or remove the foam from the cell and run an efi in-tank pump to a carb using a bypass regulator. I'm also planning on using this deal from tanksinc to provide a baffle system for hard acceleration:
http://www.tanksinc.com/index.cfm/page/p...=prod/prd84.htm

Anybody else doing this? I'd love some feedback if this is a good/bad idea. Not to hijack but thought the OP might be interested also.

thanks,

Steve