I have a 440 block with a 440 source 528ci stroker kit. I have to run an external oil system due to the stroke. The car is a 75 Cordoba that had a stock 360. I bought motor mounts from engine-swaps.com to swap the 360 to a 440. I bought a external oil pump from 440 source and it is too large to fit and cant be cut down enough. I was looking at Milidon 21215 oil pump cover, it looks smaller in the pics then the 440 source cover. I called milidon and the guy i spoke with says this over hangs the lower pump by about an inch. Any one know how far these can be trimmed down? if any. Or a slimmer external oil pump cover? I would post pics of clearance, but can not figure out how on this site. It wont let me post photobucket pics. google search of the 21215 led me to this site. but i can not see pics posted through photobucket. This is one of the few things stopping me from getting the engine in the car. Any help is greatly appreciated.