OK, summer is almost over and the kids are back to school. I did a bit on this setup but this is as far as I'm going for now. Got the caliper mounting brackets finished and after a LOT of grinding on both the spindle AND the caliper (keeping SAFETY in mind), everything fit up quite nicely. Again, this is a Dakota spindle and I don't believe you'll have half the heartburn doing this on an A, B, C, E, F, M and J body. Left to do are new wheel bearings and brake lines. I may rebuild the calipers anyway. Still, the whole shootin' match comes in under budget. I'm keeping my banker happy.

$120 machine rotors to hubs
$40 Lexus calipers from a boneyard
$100 Ford Crown Vic rotors
$22 Lexus brake pads
$36 1/2" thick steel plate
$200 machine brake caliper brackets
$20 new grade 8 bolts
$40 needed to re-machine caliper brackets (tweak)

Figuring this out... Priceless!