Will this piston/stroke/rod length work?

Print Thread

Re: Will this piston/stroke/rod length work? [Re: RemCharger] #235539 02/26/09 10:06 AM 02/26/09 10:06 AM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von OP master
Von OP master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	[quoteWhy, are you using a bbc crank? Some if not most of the aftermarket cranks are set up for a BBC rod. 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Entire Thread
Subject	Posted By	Posted
Will this piston/stroke/rod length work?	Von	02/25/09 04:41 AM
Re: Will this piston/stroke/rod length work?	Sport440	02/25/09 05:31 AM
Re: Will this piston/stroke/rod length work?	Von	02/25/09 04:39 PM
Re: Will this piston/stroke/rod length work?	JohnRR	02/25/09 04:54 PM
Re: Will this piston/stroke/rod length work?	B1MAXX	02/25/09 05:09 PM
Re: Will this piston/stroke/rod length work?	Von	02/25/09 05:13 PM
Re: Will this piston/stroke/rod length work?	B1MAXX	02/25/09 05:14 PM
Re: Will this piston/stroke/rod length work?	Von	02/25/09 05:16 PM
Re: Will this piston/stroke/rod length work?	JohnRR	02/25/09 05:35 PM
Re: Will this piston/stroke/rod length work?	B1MAXX	02/26/09 03:03 AM
Re: Will this piston/stroke/rod length work?	DemonDust	02/25/09 05:21 PM
Re: Will this piston/stroke/rod length work?	AndyF	02/25/09 05:43 PM
Re: Will this piston/stroke/rod length work?	Von	02/25/09 05:45 PM
Re: Will this piston/stroke/rod length work?	n_bogie1984	02/26/09 03:27 AM
Re: Will this piston/stroke/rod length work?	Von	02/26/09 03:40 AM
Re: Will this piston/stroke/rod length work?	Von	02/26/09 03:41 AM
Re: Will this piston/stroke/rod length work?	n_bogie1984	02/26/09 03:51 AM
Re: Will this piston/stroke/rod length work?	RemCharger	02/26/09 03:55 AM
Re: Will this piston/stroke/rod length work?	Von	02/26/09 02:06 PM
Re: Will this piston/stroke/rod length work?	B1MAXX	02/26/09 05:14 PM
Re: Will this piston/stroke/rod length work?	Von	02/26/09 09:37 PM
Re: Will this piston/stroke/rod length work?	B1MAXX	02/27/09 03:05 AM
Re: Will this piston/stroke/rod length work?	Von	02/27/09 03:30 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To