Quote:

Quote:

That will depend on the diameter of the crank counterweights and the contour of the piston skirts and thickness at the wristpin.

To the Deck the math is fine. So is my quick math to BDC. with a 7.25" crank. If things get close get the Makita, out. mike



Mike,


Thanks for your reply. If I do have clearance issues, can I turn the counterweights down and rebalance?

Seems like this combo uses 7.1 rods usually, but I already have the pistons and started



One thing you need to be concerned about is how far the pistons pulls out the bottom of the bore with the shorter rod .