Originally Posted By parksr5
Just another real world experience; my original valve covers were blasted and in etch primer when I received them. From there, I had a small dent in one of them. I actually used filler on the dent and used RM filler primer that you would use on body panels, block sanded them and then shot them with Mopar rattle can. They've been done for around 4-5 years and I've had no issues; the combo has been very durable.


THANK YOU ! bow Appreciate your input ! Seeing as that these are "New"

and look pretty nice 'Out of the Box' I believe I'm going to go with just the primer

then 'Rattle Can' with the Mopar 'Hemi Orange paint ...... I ordered some primer

& paint and will let you know how they come out in a week or so ..... luck