Originally Posted By kidmopar
Originally Posted By BlueRacer69
I just got a set of them last week myself. I going to primer mine with high temp (500 degree) ceramic primer, then shoot them with Mopar engine paint (street hemi orange). I've always had good luck with the Mopar brand engine paint, but it all begins with how you prep the item first before primer & paint.


I was kinda thinking same thing ..... May I ask what brand primer you're

going to use ? shruggy
I'm going to use Dupli-Color high heat ceramic gray primer, good to 500 degrees. Think I got it a Napa. Make sure you fellow the directions on the back of the can. Also clean your valve covers well with something like CRC's Breakleen or even paint thinner before you prime.