6.1 cam degreeing-in a 5.7 - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech 6.1 cam degreeing-in a 5.7

Print Thread

Re: 6.1 cam degreeing-in a 5.7 [Re: RTSrunner] #2280101 04/01/17 02:24 AM 04/01/17 02:24 AM
Joined: Nov 2003 Posts: 1,881 Pittsburgh,PA RTSrunner OP top fuel
RTSrunner OP top fuel Joined: Nov 2003 Posts: 1,881 Pittsburgh,PA	I found this,Crower has them listed for their timing set up to 6.No reason it cant be installed into a drilled stock gear.Still on the hunt for the 8bushing. https://www.crower.com/valve-train-components.html?cat=1971 RT

Entire Thread
Subject	Posted By	Posted
6.1 cam degreeing-in a 5.7	RTSrunner	03/14/17 05:53 AM
Re: 6.1 cam degreeing-in a 5.7	WO23Coronet	03/14/17 06:24 AM
Re: 6.1 cam degreeing-in a 5.7	RTSrunner	03/14/17 06:51 AM
Re: 6.1 cam degreeing-in a 5.7	rattler	03/20/17 03:56 AM
Re: 6.1 cam degreeing-in a 5.7	RTSrunner	03/20/17 04:46 PM
Re: 6.1 cam degreeing-in a 5.7	rattler	03/29/17 03:50 AM
Re: 6.1 cam degreeing-in a 5.7	RTSrunner	03/29/17 07:25 AM
Re: 6.1 cam degreeing-in a 5.7	rattler	03/29/17 07:21 PM
Re: 6.1 cam degreeing-in a 5.7	RTSrunner	04/01/17 06:16 AM
Re: 6.1 cam degreeing-in a 5.7	RTSrunner	04/01/17 06:24 AM
Re: 6.1 cam degreeing-in a 5.7	rattler	04/03/17 03:46 AM
Re: 6.1 cam degreeing-in a 5.7	johnscudashop	06/23/18 02:18 PM
Re: 6.1 cam degreeing-in a 5.7	WO23Coronet	06/24/18 08:55 AM
Re: 6.1 cam degreeing-in a 5.7	johnscudashop	06/24/18 05:42 PM
Re: 6.1 cam degreeing-in a 5.7	johnscudashop	07/04/18 03:38 PM
Re: 6.1 cam degreeing-in a 5.7	dogdays	07/05/18 06:37 PM
Re: 6.1 cam degreeing-in a 5.7	sixpackgut	06/25/18 01:29 AM
Re: 6.1 cam degreeing-in a 5.7	WO23Coronet	06/25/18 03:06 AM
Re: 6.1 cam degreeing-in a 5.7	sixpackgut	07/06/18 07:22 PM
Re: 6.1 cam degreeing-in a 5.7	moparmitch	07/06/18 07:36 PM
Re: 6.1 cam degreeing-in a 5.7	Supercuda	07/06/18 08:27 PM
Re: 6.1 cam degreeing-in a 5.7	sixpackgut	07/06/18 08:54 PM
Re: 6.1 cam degreeing-in a 5.7	moparmitch	07/07/18 12:31 AM
Re: 6.1 cam degreeing-in a 5.7	johnscudashop	07/08/18 01:38 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1