Originally Posted By Cab_Burge
Originally Posted By Blucuda413
I know it's a no-no to use anything but a nice brass gear for solid roller lifters but is there anything wrong in using the same brass gear with flat tappet solid lifters?
Don't do that tsk Use a stock OEM drive up


Cab.. what is the reasoning for this.. my thoughts
were that you didnt use the OEM on the roller due
to the hardness of the cam and it pounding back and
forth on the lobes(as it came off the lobes)
wave

Last edited by MR_P_BODY; 03/27/17 03:12 PM.