Anyone had problems with these cams (buff colour) , just seems to pour the fuel through the shooters , this carb is out the box & runs wayyyyyyyyyyy rich between 1500rpm & upwards , heard theres some tuning issues with these 3 circuit carbs but the motor is flooded with fuel through the rpm range , changed carbs & the motor runs sweet , this motor is a 605" , will change the cams & see what happens , what does'nt help is the throttle linkage is a 1:1 ratio , so when you open the throttle both primary & sec shooters are activated@ the same time.

If the motor was a 440" i could understand it not working out the box , but this is a 605" so would think the volume/duration of shooter would be near the mark. I've got two other 1050 2 circuit dominators that run fine on the 605" , the volume/duration of fuel out the shooters does'nt even come close to the 3 circuit , just thinking what motor would require that ammout of fuel out the shooters to perform ok.

TIA