As long as we're talking about engine VINs here, I have a question. Everyone talks about partial VINs, but I have several engines and transmissions that have the full VIN stamped on them. They are all 69 model year. I currently have 2 426 Hemis, a 440 HP, a 383 HP, a Hemi 4 speed, a 23 spline a body 4 speed and at least one 727 auto that have full VINs. All have Serial #s below 275,XXX. I also have one 23 spline a body 4 speed with only a partial VIN, but it's Serial # is over 300,XXX. While most are from the St Louis plant (G code), 2 of them are from Hamtramck, and I have seen other full VIN blocks and transmissions on the Mopar Lost and Found Facebook page, at least two from Lynch Road. Can anybody shed some light on this?
For part of the 69 model year they stamped full VINs. That was neat because you knew exactly what car it went into. For some reason they went back to partials.
