8 3/4 into D150, shorten driveshaft? - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop 8 3/4 into D150, shorten driveshaft?

Print Thread

Re: 8 3/4 into D150, shorten driveshaft? [Re: Mopar1970440] #2245255 02/01/17 01:15 PM 02/01/17 01:15 PM
Joined: Jan 2003 Posts: 781 usa M Mopar1970440 OP super stock
Mopar1970440 OP super stock M Joined: Jan 2003 Posts: 781 usa	well I bolted the rear-end in, got the driveshaft in, it is so far in the transmission tail shaft that the yoke is jamming into the tailshaft seal, so yes..looks like it will have to be shortened.

Entire Thread
Subject	Posted By	Posted
8 3/4 into D150, shorten driveshaft?	Mopar1970440	01/31/17 05:01 AM
Re: 8 3/4 into D150, shorten driveshaft?	68dodge	01/31/17 08:49 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	01/31/17 08:57 PM
Re: 8 3/4 into D150, shorten driveshaft?	John_Kunkel	01/31/17 09:13 PM
Re: 8 3/4 into D150, shorten driveshaft?	Guitar Jones	02/01/17 05:54 AM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/01/17 05:15 PM
Re: 8 3/4 into D150, shorten driveshaft?	Robbins	02/01/17 08:06 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	02/01/17 11:12 PM
Re: 8 3/4 into D150, shorten driveshaft?	Magnum	02/02/17 02:40 AM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/02/17 03:48 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	02/03/17 03:20 AM
Re: 8 3/4 into D150, shorten driveshaft?	old_goat	02/03/17 09:07 PM
Re: 8 3/4 into D150, shorten driveshaft?	77ProStreet	02/04/17 08:26 AM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/06/17 07:46 PM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/07/17 04:03 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	02/07/17 04:59 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1