8 3/4 into D150, shorten driveshaft? - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop 8 3/4 into D150, shorten driveshaft?

Print Thread

Re: 8 3/4 into D150, shorten driveshaft? [Re: Mopar1970440] #2244784 01/31/17 04:49 PM 01/31/17 04:49 PM
Joined: Jan 2003 Posts: 516 ,Pa. 68dodge mopar
68dodge mopar Joined: Jan 2003 Posts: 516 ,Pa.	That will depend on how much room was left on the driveshaft going into the trans. I would say no, or it will be pretty tight.

Entire Thread
Subject	Posted By	Posted
8 3/4 into D150, shorten driveshaft?	Mopar1970440	01/31/17 05:01 AM
Re: 8 3/4 into D150, shorten driveshaft?	68dodge	01/31/17 08:49 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	01/31/17 08:57 PM
Re: 8 3/4 into D150, shorten driveshaft?	John_Kunkel	01/31/17 09:13 PM
Re: 8 3/4 into D150, shorten driveshaft?	Guitar Jones	02/01/17 05:54 AM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/01/17 05:15 PM
Re: 8 3/4 into D150, shorten driveshaft?	Robbins	02/01/17 08:06 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	02/01/17 11:12 PM
Re: 8 3/4 into D150, shorten driveshaft?	Magnum	02/02/17 02:40 AM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/02/17 03:48 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	02/03/17 03:20 AM
Re: 8 3/4 into D150, shorten driveshaft?	old_goat	02/03/17 09:07 PM
Re: 8 3/4 into D150, shorten driveshaft?	77ProStreet	02/04/17 08:26 AM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/06/17 07:46 PM
Re: 8 3/4 into D150, shorten driveshaft?	Mopar1970440	02/07/17 04:03 PM
Re: 8 3/4 into D150, shorten driveshaft?	scratchnfotraction	02/07/17 04:59 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1