I found my copys of the ARP instructions, 1/2 inch main same as listed above.
ARP head stud kits list 80 ft. Lbs. with ARP Ultra Torque lube in three equal steps? work 80 divided by 3=26.66666 shruggy
I have the instructions for their BB Mopar head bolt kit with thier old lube and it shows to use 65 ft. lbs. with thier old ARP Moly Assembly lube or thread sealer and 85 Ft.Lbs. with 30 wt oil shruggy
On the rod bolts I use a stretch gauge and write down the average torque needed with the ARP lube needed to get to the middle strech specs., if one or more stretch longer than the average I throw them away and replace them with ones that meet the needed average torqe required to match the rest scope up

Last edited by Cab_Burge; 12/28/16 04:03 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)