block clearence for a 440 to 500 cid,

Print Thread

Re: block clearence for a 440 to 500 cid, [Re: kingdust] #219816 02/11/09 12:03 AM 02/11/09 12:03 AM
Joined: Dec 2005 Posts: 2,886 Bowling Green KY / Nashville, ... 300by500 master
300by500 master Joined: Dec 2005 Posts: 2,886 Bowling Green KY / Nashville, ...	500 on pump gas is a low estimate, IMHO. It'll make more than that! As far as clearance, I used Eagle H-beams with .990 pins on mine with a 4.15 crank, and the clearancing was minimal. https://i.imgur.com/tmuGzov.jpg

Entire Thread
Subject	Posted By	Posted
block clearence for a 440 to 500 cid,	kingdust	02/10/09 02:27 PM
Re: block clearence for a 440 to 500 cid,	AndyF	02/10/09 04:02 PM
Re: block clearence for a 440 to 500 cid,	Cab_Burge	02/10/09 05:45 PM
Re: block clearence for a 440 to 500 cid,	hemisurfer	02/10/09 06:00 PM
Re: block clearence for a 440 to 500 cid,	kingdust	02/10/09 06:29 PM
Re: block clearence for a 440 to 500 cid,	440dart	02/10/09 08:56 PM
Re: block clearence for a 440 to 500 cid,	kingdust	02/11/09 04:02 AM
Re: block clearence for a 440 to 500 cid,	440dart	02/11/09 09:15 PM
Re: block clearence for a 440 to 500 cid,	dstryr	02/11/09 10:20 PM
Re: block clearence for a 440 to 500 cid,	Cab_Burge	02/10/09 09:53 PM
Re: block clearence for a 440 to 500 cid,	kingdust	02/11/09 04:00 AM
Re: block clearence for a 440 to 500 cid,	300by500	02/11/09 04:03 AM

Hop To