Well......its been a work in progress for a long time! Every time we would get it going the rules would change for the class we were building it for. That happened about 3 times. Its been changed from big block to small block and now back to big block again. Its a true ten five car with ladder bars and coilovers. It has 28.0 x 10.5 rear tires. All aluminum 540. Indy block with -1 heads. Speedtech diffuser plate system. Alterktion front end. The problem we have had the last couple years is keeping it grounded! We've had 3 BAD wheelstand instances, one resulting in a minor crash! We really wanted to make it run without sissy bars but have finally given that dream up. It is scheduled to go to the chassis shop later this month for wheelie bars and to update the cage and chassis to current specs. We have only sprayed it with a 250 shot so far and have run low 5.50s in the 1/8 with as good as 1.26 60ft. We really feel that we can squeeze 5.20s and possibly high teens out of it once we are able to actually spray it with a decent shot. Motor builder said he doens't see a problem spraying up to 600 on it but we want to stay around 400 with it. The last couple years have been aggravating b/c we just keep tearing stuff up with the wheelies so we are really looking forward to getting rid of that problem. Thanks for the compliments.....