SB race block cam tunnel machined wrong

Print Thread

Re: SB race block cam tunnel machined wrong [Re: P7 Engineering] #2183272 10/26/16 09:36 PM 10/26/16 09:36 PM
Joined: Oct 2005 Posts: 739 Florida 4 408Dust super stock
408Dust super stock 4 Joined: Oct 2005 Posts: 739 Florida	LSM 248-674-4967 I had one made for me in less then three weeks before the gators this year 54 mm. 9.200 59 degree buzz it pretty good with no issues.

Entire Thread
Subject	Posted By	Posted
SB race block cam tunnel machined wrong	P7 Engineering	10/24/16 07:33 PM
Re: SB race block cam tunnel machined wrong	scottb	10/24/16 10:11 PM
Re: SB race block cam tunnel machined wrong	Evil Spirit	10/25/16 07:21 AM
Re: SB race block cam tunnel machined wrong	408Dust	10/25/16 01:21 AM
Re: SB race block cam tunnel machined wrong	LA360	10/25/16 02:58 AM
Re: SB race block cam tunnel machined wrong	WHITEDART	10/25/16 02:43 PM
Re: SB race block cam tunnel machined wrong	J_BODY	10/25/16 07:21 AM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/26/16 03:57 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/26/16 04:27 PM
Re: SB race block cam tunnel machined wrong	Monte_Smith	10/27/16 03:53 PM
Re: SB race block cam tunnel machined wrong	rpagan	10/26/16 10:14 PM
Re: SB race block cam tunnel machined wrong	408Dust	10/27/16 01:36 AM
Re: SB race block cam tunnel machined wrong	sr4440	10/27/16 01:52 AM
Re: SB race block cam tunnel machined wrong	J_BODY	10/27/16 03:24 AM
Re: SB race block cam tunnel machined wrong	NoFrills	10/27/16 03:49 AM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 03:30 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 03:42 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 06:52 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:52 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:53 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:54 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:55 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:58 PM
Re: SB race block cam tunnel machined wrong	dogdays	10/27/16 08:10 PM
Re: SB race block cam tunnel machined wrong	NoFrills	10/27/16 08:35 PM
Re: SB race block cam tunnel machined wrong	Twostick	10/27/16 08:50 PM
Re: SB race block cam tunnel machined wrong	dodgeboy11	10/27/16 09:32 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 10:22 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To