SB race block cam tunnel machined wrong

Print Thread

Re: SB race block cam tunnel machined wrong [Re: P7 Engineering] #2181747 10/24/16 09:21 PM 10/24/16 09:21 PM
Joined: Oct 2005 Posts: 739 Florida 4 408Dust super stock
408Dust super stock 4 Joined: Oct 2005 Posts: 739 Florida	Why not have the tunnel machined and run 54,55 mm cam? Thats what I did.

Entire Thread
Subject	Posted By	Posted
SB race block cam tunnel machined wrong	P7 Engineering	10/24/16 07:33 PM
Re: SB race block cam tunnel machined wrong	scottb	10/24/16 10:11 PM
Re: SB race block cam tunnel machined wrong	Evil Spirit	10/25/16 07:21 AM
Re: SB race block cam tunnel machined wrong	408Dust	10/25/16 01:21 AM
Re: SB race block cam tunnel machined wrong	LA360	10/25/16 02:58 AM
Re: SB race block cam tunnel machined wrong	WHITEDART	10/25/16 02:43 PM
Re: SB race block cam tunnel machined wrong	J_BODY	10/25/16 07:21 AM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/26/16 03:57 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/26/16 04:27 PM
Re: SB race block cam tunnel machined wrong	Monte_Smith	10/27/16 03:53 PM
Re: SB race block cam tunnel machined wrong	rpagan	10/26/16 10:14 PM
Re: SB race block cam tunnel machined wrong	408Dust	10/27/16 01:36 AM
Re: SB race block cam tunnel machined wrong	sr4440	10/27/16 01:52 AM
Re: SB race block cam tunnel machined wrong	J_BODY	10/27/16 03:24 AM
Re: SB race block cam tunnel machined wrong	NoFrills	10/27/16 03:49 AM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 03:30 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 03:42 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 06:52 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:52 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:53 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:54 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:55 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 07:58 PM
Re: SB race block cam tunnel machined wrong	dogdays	10/27/16 08:10 PM
Re: SB race block cam tunnel machined wrong	NoFrills	10/27/16 08:35 PM
Re: SB race block cam tunnel machined wrong	Twostick	10/27/16 08:50 PM
Re: SB race block cam tunnel machined wrong	dodgeboy11	10/27/16 09:32 PM
Re: SB race block cam tunnel machined wrong	P7 Engineering	10/27/16 10:22 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To