This is one I made several years ago for my 68 RR project. I made it a little taller so I could have room to work it under my lift as I was bolting it in. Couple of small issues I ran into was with the Milodon oil pan and K-frame - I needed to put a notch in the one upper rail to clear the pan. I also put some nylon sheet scraps on the top to protect the paint (wood would work just as well). I used a spare scissor jack I got out of some car at the junkyard to allow me to fine adjust the angle during installation (weld it to the cradle so it does not move). I also put the spindles and brakes together on the K-frame initially but since my lift was a 4-post style I had to remove them to clear the lift tracks. It was probably a little overkill for a one time shot but I gave it to a mopar restoration shop so it still sees good use.

Jim