Setting Timing With Vacuum Gauge

Print Thread

Re: Setting Timing With Vacuum Gauge [Re: DrCharles] #2166108 10/01/16 08:56 PM 10/01/16 08:56 PM
Joined: Nov 2005 Posts: 235 ga R ringo440 OP enthusiast
ringo440 OP enthusiast R Joined: Nov 2005 Posts: 235 ga	So 18 is not too much initial timing ? I get around 15 inches on vacuum gauge. Did not know i could run that much timing.

Entire Thread
Subject	Posted By	Posted
Setting Timing With Vacuum Gauge	ringo440	10/01/16 11:22 PM
Re: Setting Timing With Vacuum Gauge	DrCharles	10/01/16 11:32 PM
Re: Setting Timing With Vacuum Gauge	ringo440	10/02/16 12:56 AM
Re: Setting Timing With Vacuum Gauge	topside	10/02/16 01:01 AM
Re: Setting Timing With Vacuum Gauge	RapidRobert	10/02/16 02:23 AM
Re: Setting Timing With Vacuum Gauge	ringo440	10/02/16 02:48 AM
Re: Setting Timing With Vacuum Gauge	RapidRobert	10/02/16 02:51 AM
Re: Setting Timing With Vacuum Gauge	Magnum	10/02/16 03:03 AM
Re: Setting Timing With Vacuum Gauge	375inStroke	10/02/16 08:00 AM
Re: Setting Timing With Vacuum Gauge	DrCharles	10/02/16 05:51 PM
Re: Setting Timing With Vacuum Gauge	ngpSatellite	10/02/16 12:41 PM
Re: Setting Timing With Vacuum Gauge	ringo440	10/02/16 02:19 PM
Re: Setting Timing With Vacuum Gauge	RapidRobert	10/02/16 03:58 PM
Re: Setting Timing With Vacuum Gauge	ringo440	10/02/16 05:33 PM
Re: Setting Timing With Vacuum Gauge	Sxrxrnr	10/02/16 06:54 PM

Hop To