Hey guys, thanks for the replys.

I don't think i still have the Comp shafts that came with the rockers. I think I used some bannana groove rockers I had laying around that I was going to use on a different project.

Valve gear is being oiled throught the shafts with Indy S/R heads.

They worked fine on my old roller cam for a long time and a lot of passes at the track. Even took them up to 7k rpm's a few times. But....I did have really high oil pressure, like 90 pounds hot with the R's over about 1200. used Mobil 1 15w50 if that makes any difference.