fitting a cam into a fresh 400 block

Print Thread

Re: fitting a cam into a fresh 400 block [Re: MR_P_BODY] #2129702 08/10/16 06:41 PM 08/10/16 06:41 PM
Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan	Yes, when I pulled the cam out I did find marks on the upper part of front and rear cam bearing only. I can scotch Brite them. It's all I have for dressing bearings http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
fitting a cam into a fresh 400 block	mopar dave	08/10/16 07:34 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/10/16 07:38 PM
Re: fitting a cam into a fresh 400 block	rickseeman	08/10/16 08:21 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/10/16 08:30 PM
Re: fitting a cam into a fresh 400 block	MR_P_BODY	08/10/16 09:27 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/10/16 10:41 PM
Re: fitting a cam into a fresh 400 block	John_Kunkel	08/10/16 10:43 PM
Re: fitting a cam into a fresh 400 block	MR_P_BODY	08/10/16 11:15 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/10/16 11:47 PM
Re: fitting a cam into a fresh 400 block	dartman366	08/11/16 02:23 AM
Re: fitting a cam into a fresh 400 block	mopar dave	08/11/16 03:12 AM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/11/16 04:16 AM
Re: fitting a cam into a fresh 400 block	mopar dave	08/11/16 04:30 AM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/11/16 04:33 AM
Re: fitting a cam into a fresh 400 block	mopar dave	08/11/16 06:05 AM
Re: fitting a cam into a fresh 400 block	dogdays	08/11/16 09:42 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/12/16 06:43 PM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/12/16 06:56 PM
Re: fitting a cam into a fresh 400 block	John_Kunkel	08/12/16 07:25 PM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/12/16 11:17 PM
Re: fitting a cam into a fresh 400 block	John_Kunkel	08/13/16 09:03 PM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/14/16 07:01 AM
Re: fitting a cam into a fresh 400 block	MR_P_BODY	08/14/16 06:42 PM
Re: fitting a cam into a fresh 400 block	JohnRR	08/12/16 07:29 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/12/16 07:47 PM
Re: fitting a cam into a fresh 400 block	JohnRR	08/12/16 07:29 PM
Re: fitting a cam into a fresh 400 block	Chris2581	08/11/16 12:31 AM
Re: fitting a cam into a fresh 400 block	mopar dave	08/11/16 01:25 AM
Re: fitting a cam into a fresh 400 block	BigBlockMopar	08/13/16 11:41 AM
Re: fitting a cam into a fresh 400 block	mopar dave	08/13/16 03:56 PM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/13/16 05:49 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/13/16 06:18 PM
Re: fitting a cam into a fresh 400 block	Monte_Smith	08/14/16 09:48 AM
Re: fitting a cam into a fresh 400 block	mopar dave	08/14/16 04:22 PM
Re: fitting a cam into a fresh 400 block	yella71	08/14/16 04:28 PM
Re: fitting a cam into a fresh 400 block	mopar dave	08/14/16 11:59 PM
Re: fitting a cam into a fresh 400 block	Cab_Burge	08/15/16 07:50 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To