File Fit Ring End Gap Specs on Street Motor ?

Print Thread

Re: File Fit Ring End Gap Specs on Street Motor ? [Re: Cab_Burge] #212895 02/03/09 02:03 PM 02/03/09 02:03 PM
Joined: Feb 2004 Posts: 3,076 Renton, Wa. C Classof70Chally OP super gas
Classof70Chally OP super gas C Joined: Feb 2004 Posts: 3,076 Renton, Wa.	Okay, so if Total Seals specs show .020 for the top then maybe go .022? But they show a spec of .015 or .016 for the second then you would go .022 to .026 ???

Entire Thread
Subject	Posted By	Posted
File Fit Ring End Gap Specs on Street Motor ?	Classof70Chally	02/03/09 04:18 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	moper	02/03/09 04:42 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	maximum entropy	02/03/09 04:48 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Classof70Chally	02/03/09 04:55 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	MR_P_BODY	02/03/09 04:47 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Cab_Burge	02/03/09 04:59 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Classof70Chally	02/03/09 06:03 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	maximum entropy	02/03/09 06:06 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Classof70Chally	02/03/09 06:17 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	maximum entropy	02/03/09 06:20 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Anonymous	02/03/09 07:27 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	maximum entropy	02/03/09 07:47 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Anonymous	02/03/09 08:02 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	maximum entropy	02/03/09 08:44 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Classof70Chally	02/03/09 09:22 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	Classof70Chally	02/03/09 07:51 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	mopardamo	02/03/09 10:34 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	maximum entropy	02/03/09 10:48 PM
Re: File Fit Ring End Gap Specs on Street Motor ?	MR_P_BODY	02/03/09 06:13 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To