appearance of bulkhead at firewall ?

Print Thread

Re: appearance of bulkhead at firewall ? [Re: juicedcuda] #208993 01/31/09 11:06 AM 01/31/09 11:06 AM
Joined: Jan 2003 Posts: 5,907 Athens, Greece Pyper70 master
Pyper70 master Joined: Jan 2003 Posts: 5,907 Athens, Greece	Quote: the bulkhead is the back side of the fuse panel correct? I wanted to avoid relocating the fuseblock. Nope. The bulkhead has female terminals on the firewall from the passenger compartment and the engine side has harnesses with Male sides. Your fuseblock depends on the body. A-Body is on the left side of the dash by the kick panel, B body is usually in the glovebox. E-Body...I havent a clue I have seen custom aluminum covers for those bulkheads and all the wires coming out of it are inserted at 90 degrees. Bit much.... A nice clean neatly wrapped harness looks just fine. Relocating the whole thing to the inside might look nice but in the long run, crawling underneath to disconnect something will be a PITA Family owned 1969 Charger R/T DualQuad 440/727/GVO/3.55s

Entire Thread
Subject	Posted By	Posted
appearance of bulkhead at firewall ?	juicedcuda	01/31/09 03:08 AM
Re: appearance of bulkhead at firewall ?	moparsquid	01/31/09 04:14 AM
Re: appearance of bulkhead at firewall ?	Darius	01/31/09 02:08 PM
Re: appearance of bulkhead at firewall ?	Darius	01/31/09 02:10 PM
Re: appearance of bulkhead at firewall ?	juicedcuda	01/31/09 02:28 PM
Re: appearance of bulkhead at firewall ?	Pyper70	01/31/09 03:06 PM
Re: appearance of bulkhead at firewall ?	Chris2581	01/31/09 05:30 PM
Re: appearance of bulkhead at firewall ?	NachoRT74	02/01/09 07:23 AM
Re: appearance of bulkhead at firewall ?	In_The_Pink	02/01/09 07:22 PM

Hop To