Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?

Print Thread

Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy? [Re: jcc] #2086288 06/05/16 11:52 AM 06/05/16 11:52 AM
Joined: Oct 2007 Posts: 4,210 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,210 New York	Unless you use the 3.09:1 box, or a very high (numerical) axle, the light flywheel will require you to drive it like a 2-stroke. Not fun in traffic. Boffin Emeritus

Entire Thread
Subject	Posted By	Posted
Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 03:01 AM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	ahy	06/05/16 03:21 AM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 03:28 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	fourgearsavoy	06/05/16 03:38 AM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 03:30 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	fourgearsavoy	06/05/16 05:52 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	hemi-itis	06/05/16 04:07 AM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 03:33 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	Bill MeLater	06/05/16 04:20 AM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 03:35 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	MR_P_BODY	06/05/16 03:48 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 03:57 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	MR_P_BODY	06/05/16 04:07 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 04:24 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	polyspheric	06/05/16 03:52 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 04:04 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	FastmOp	06/05/16 05:11 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	MR_P_BODY	06/05/16 05:43 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	Crizila	06/05/16 06:33 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	slantzilla	06/05/16 07:14 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/05/16 08:22 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	Scott440	06/05/16 09:51 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/06/16 03:48 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	Crizila	06/06/16 04:17 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	MR_P_BODY	06/06/16 05:01 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	jcc	06/22/16 02:51 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	polyspheric	06/05/16 10:10 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	SportF	06/06/16 02:14 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	MR_P_BODY	06/06/16 04:36 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	FastmOp	06/22/16 06:11 PM
Re: Kevlar/CF laminating an OEM Alum manual bellhousing, Crazy?	dogdays	06/22/16 07:54 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To