Quote:
Here are the Engine Specs:
451 6pac Stroker Stage II ported Edelbrock 84cc heads, 2.14 Intake and 1.81 Exhaust valves.
Stage II street/strip port flowed 285 cfm @550 lift.
The 400 block has been square decked and line honed and sonic checked.
440 Crank forged steel unit.
Compression is 10.95:1 .060 Keith Black KB251 pistons, Rods, factory LY rods w/ ARP rod bolts.
Cam shaft is a Lunati 273/ 279, Lift .578/ .585 @110 cl and 1.6 ratio roller rockers.
The motor is fully balanced to within .2 tenths of a gram.
Mopar 6 pack intake and carbs
Motor made 585 hp and 550 foot lbs torque.....
Dana 60 w 4:56 and a Powr-Loc
325X50X15's on a 10 in Convo Pro Centerline rim
18 spline 4-speed
I know my head flow are not in sync with the cam But I planed on possibly changing to a 4 bbl later and reporting the heads.
"The advantage of being armed the Americans possess over the people of all other nations,which are carried as far as the public resources will bear, the governments are afraid to trust the people with arms."(James Madison)
69 Hemi Coronet R/T
70 456 Dart Swinger
| 
