Balancing the clutch and flywheel on a cast crank 340

Print Thread

Re: Balancing the clutch and flywheel on a cast crank 340 [Re: moparmedic] #2075175 05/17/16 03:42 PM 05/17/16 03:42 PM
Joined: Jan 2003 Posts: 25,925 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,925 Rio Linda, CA	In every case I've seen, if the clutch was balanced with the engine there will be some sort of witness mark on the pressure plate flange so it can be reassembled in the same position. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
Balancing the clutch and flywheel on a cast crank 340	moparmedic	05/17/16 05:23 PM
Re: Balancing the clutch and flywheel on a cast crank 340	buildanother	05/17/16 06:53 PM
Re: Balancing the clutch and flywheel on a cast crank 340	dogdays	05/17/16 07:36 PM
Re: Balancing the clutch and flywheel on a cast crank 340	John_Kunkel	05/17/16 07:42 PM
Re: Balancing the clutch and flywheel on a cast crank 340	moparmedic	05/17/16 08:21 PM
Re: Balancing the clutch and flywheel on a cast crank 340	JohnRR	05/18/16 03:16 PM
Re: Balancing the clutch and flywheel on a cast crank 340	GODSCOUNTRY340	05/17/16 08:39 PM
Re: Balancing the clutch and flywheel on a cast crank 340	moparmedic	05/17/16 09:01 PM
Re: Balancing the clutch and flywheel on a cast crank 340	dogdays	05/17/16 11:53 PM
Re: Balancing the clutch and flywheel on a cast crank 340	moparmedic	05/18/16 01:49 AM
Re: Balancing the clutch and flywheel on a cast crank 340	rowin4	05/18/16 04:33 AM
Re: Balancing the clutch and flywheel on a cast crank 340	madscientist	05/19/16 01:11 AM
Re: Balancing the clutch and flywheel on a cast crank 340	Supercuda	05/18/16 05:01 AM
Re: Balancing the clutch and flywheel on a cast crank 340	moparmedic	05/18/16 05:50 AM
Re: Balancing the clutch and flywheel on a cast crank 340	moparx	05/18/16 02:11 PM
Re: Balancing the clutch and flywheel on a cast crank 340	moparmedic	05/18/16 04:24 PM
Re: Balancing the clutch and flywheel on a cast crank 340	JohnRR	05/18/16 06:16 PM
Re: Balancing the clutch and flywheel on a cast crank 340	dogdays	05/18/16 10:53 PM
Re: Balancing the clutch and flywheel on a cast crank 340	madscientist	05/19/16 01:13 AM
Re: Balancing the clutch and flywheel on a cast crank 340	rowin4	05/19/16 03:45 AM
Re: Balancing the clutch and flywheel on a cast crank 340	madscientist	05/19/16 10:34 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To