Which valve springs should I use?

Print Thread

Re: Which valve springs should I use? [Re: crackedback] #2004127 02/02/16 02:46 PM 02/02/16 02:46 PM
Joined: Jan 2003 Posts: 16,376 D dogdays I Live Here
dogdays I Live Here D Joined: Jan 2003 Posts: 16,376	Once again I say unto you, that's nearly a stock cam, no need to go any better on springs than the Enginequest. I'm sure many people have installed that cam or the 340 cam in a stock 318 or 360 and not changed the springs at all. Back in my chevy days I did the equivalent, swapped a .450 lift cam for a .400 lift cam without touching the springs. No issues except dealing with the extra power. R. Last edited by dogdays; 02/02/16 02:48 PM.

Entire Thread
Subject	Posted By	Posted
Which valve springs should I use?	Got2Gnow	01/28/16 03:39 AM
Re: Which valve springs should I use?	RapidRobert	01/28/16 04:15 AM
Re: Which valve springs should I use?	YO7_A66	01/28/16 04:46 AM
Re: Which valve springs should I use?	mikemee1331	01/28/16 02:00 PM
Re: Which valve springs should I use?	Supercuda	01/28/16 06:23 PM
Re: Which valve springs should I use?	dogdays	01/28/16 07:00 PM
Re: Which valve springs should I use?	Got2Gnow	01/30/16 05:00 PM
Re: Which valve springs should I use?	Supercuda	01/30/16 05:13 PM
Re: Which valve springs should I use?	Got2Gnow	01/31/16 12:05 AM
Re: Which valve springs should I use?	dogdays	02/01/16 07:10 PM
Re: Which valve springs should I use?	RapidRobert	02/01/16 10:46 PM
Re: Which valve springs should I use?	Supercuda	02/01/16 09:27 PM
Re: Which valve springs should I use?	crackedback	02/01/16 10:57 PM
Re: Which valve springs should I use?	dogdays	02/02/16 06:46 PM

Hop To