Which valve springs should I use?

Print Thread

Re: Which valve springs should I use? [Re: Got2Gnow] #2000441 01/28/16 02:23 PM 01/28/16 02:23 PM
Joined: Sep 2007 Posts: 14,889 up yours Supercuda About to go away
Supercuda About to go away Joined: Sep 2007 Posts: 14,889 up yours	You are running what is basically the stock 340 cam, run the 340 valve springs too. Rock auto sells them for a bit less than the recommended kits above, SEALED POWER VS678, $3.30 each. They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.

Entire Thread
Subject	Posted By	Posted
Which valve springs should I use?	Got2Gnow	01/28/16 03:39 AM
Re: Which valve springs should I use?	RapidRobert	01/28/16 04:15 AM
Re: Which valve springs should I use?	YO7_A66	01/28/16 04:46 AM
Re: Which valve springs should I use?	mikemee1331	01/28/16 02:00 PM
Re: Which valve springs should I use?	Supercuda	01/28/16 06:23 PM
Re: Which valve springs should I use?	dogdays	01/28/16 07:00 PM
Re: Which valve springs should I use?	Got2Gnow	01/30/16 05:00 PM
Re: Which valve springs should I use?	Supercuda	01/30/16 05:13 PM
Re: Which valve springs should I use?	Got2Gnow	01/31/16 12:05 AM
Re: Which valve springs should I use?	dogdays	02/01/16 07:10 PM
Re: Which valve springs should I use?	RapidRobert	02/01/16 10:46 PM
Re: Which valve springs should I use?	Supercuda	02/01/16 09:27 PM
Re: Which valve springs should I use?	crackedback	02/01/16 10:57 PM
Re: Which valve springs should I use?	dogdays	02/02/16 06:46 PM

Hop To