Got some of the missing parts for my 40 and it's on the 'front burner' although the weather means not much work has been done and the lack of funds means it will still be a while until it's running.
What parts are you missing for the '40??
Sorry, I didn't see this until tonight.
Not much as far as 40 stuff. I will need to source the clips for the front trim (grille and hood). That can wait until it's running.
I need to plumb the fuel lines in the back, mount the gas tank (need some C channel or square tubing), have the lines and fittings. Also need a fuel pump (97 Jeep Wrangler). Good to fit the filler neck too.
Got radiator hoses, need to run them (probably splice the lower).
Mount the electric fan and trans cooler, plumb the cooler to the lines and go over the engine (rotate it, prime the pump, etc.), then reinstall the front clip fully.
Get some switches for the interior (ignition and lights) to check out the wiring.
A '92 Dakota cluster with tach (have a non-tach cluster, but the harness is tach style.) and fab up some mounts for it.
Run some aux battery cables from the left front area to behind the seat.
All in all, not too bad a list. Just need to get the fire inside going again.
