Porting Bits...Cut and Lifespan

Print Thread

Re: Porting Bits...Cut and Lifespan [Re: Baxter61] #1989772 01/13/16 10:54 AM 01/13/16 10:54 AM
Joined: Sep 2004 Posts: 2,093 oberlin, Ohio Rapid340 top fuel
Rapid340 top fuel Joined: Sep 2004 Posts: 2,093 oberlin, Ohio	I prefer using burrs recommended for aluminum (wide single cut) when porting iron heads. 1971 Factory Appearing Duster 340 11.000 @ 122 mph

Entire Thread
Subject	Posted By	Posted
Porting Bits...Cut and Lifespan	Baxter61	01/11/16 05:49 PM
Re: Porting Bits...Cut and Lifespan	Stanton	01/11/16 06:40 PM
Re: Porting Bits...Cut and Lifespan	Triple Threat	01/11/16 07:06 PM
Re: Porting Bits...Cut and Lifespan	dartman366	01/11/16 07:49 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/11/16 08:00 PM
Re: Porting Bits...Cut and Lifespan	dartman366	01/11/16 08:50 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/11/16 08:52 PM
Re: Porting Bits...Cut and Lifespan	HotRodDave	01/11/16 10:20 PM
Re: Porting Bits...Cut and Lifespan	FastmOp	01/11/16 11:44 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 12:03 AM
Re: Porting Bits...Cut and Lifespan	Hemi ragtop	01/12/16 12:02 AM
Re: Porting Bits...Cut and Lifespan	jake4cars	01/12/16 01:29 AM
Re: Porting Bits...Cut and Lifespan	markz528	01/12/16 05:04 AM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 06:28 AM
Re: Porting Bits...Cut and Lifespan	Baxter61	01/12/16 08:33 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 09:45 PM
Re: Porting Bits...Cut and Lifespan	Rapid340	01/13/16 02:54 PM
Re: Porting Bits...Cut and Lifespan	moparx	01/13/16 03:46 PM
Re: Porting Bits...Cut and Lifespan	mopar dave	01/13/16 06:50 PM

Hop To