Porting Bits...Cut and Lifespan

Print Thread

Re: Porting Bits...Cut and Lifespan [Re: Baxter61] #1988721 01/11/16 07:44 PM 01/11/16 07:44 PM
Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge FastmOp master
FastmOp master Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge	I use carbide, I have a front exhaust die grinder. WD-40 helps. If one does get clogged with aluminum just grind some scrap steel and it will clean it's self.

Entire Thread
Subject	Posted By	Posted
Porting Bits...Cut and Lifespan	Baxter61	01/11/16 05:49 PM
Re: Porting Bits...Cut and Lifespan	Stanton	01/11/16 06:40 PM
Re: Porting Bits...Cut and Lifespan	Triple Threat	01/11/16 07:06 PM
Re: Porting Bits...Cut and Lifespan	dartman366	01/11/16 07:49 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/11/16 08:00 PM
Re: Porting Bits...Cut and Lifespan	dartman366	01/11/16 08:50 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/11/16 08:52 PM
Re: Porting Bits...Cut and Lifespan	HotRodDave	01/11/16 10:20 PM
Re: Porting Bits...Cut and Lifespan	FastmOp	01/11/16 11:44 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 12:03 AM
Re: Porting Bits...Cut and Lifespan	Hemi ragtop	01/12/16 12:02 AM
Re: Porting Bits...Cut and Lifespan	jake4cars	01/12/16 01:29 AM
Re: Porting Bits...Cut and Lifespan	markz528	01/12/16 05:04 AM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 06:28 AM
Re: Porting Bits...Cut and Lifespan	Baxter61	01/12/16 08:33 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 09:45 PM
Re: Porting Bits...Cut and Lifespan	Rapid340	01/13/16 02:54 PM
Re: Porting Bits...Cut and Lifespan	moparx	01/13/16 03:46 PM
Re: Porting Bits...Cut and Lifespan	mopar dave	01/13/16 06:50 PM

Hop To