1 good thing on the hedman 79170 set is no oil gets on the tubes when changing oil filter.

I think you would be better off finding a 4x4 hump/floor patch out of a mid 70s truck. the front 1/2 should be the same as any reg cab floor pan with the club cab having a back 1/2 floor pan.

I cut a hole to fit the cab on the chassis then cut/fit my 4x4 hump to fit in the cab over lapping on the contours of the auto floor pan. drill by bolt holes the trimed the hole out under the patch. I can add a 4x4 and shifter in the future.