Cam timing and piston to valve

Print Thread

Re: Cam timing and piston to valve [Re: sixty9bee] #196416 01/18/09 01:29 PM 01/18/09 01:29 PM
A Anonymous Unregistered
Anonymous Unregistered A	I haven't seen a Ross piston for a wedge that will handle .700 without fly cutting pistons...Better off doing it now instead of fixing a dropped/bent valve..

Entire Thread
Subject	Posted By	Posted
Cam timing and piston to valve	sixty9bee	01/17/09 11:50 PM
Re: Cam timing and piston to valve	sixty9bee	01/17/09 11:54 PM
Re: Cam timing and piston to valve	SCATPACK 1	01/18/09 12:05 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 12:10 AM
Re: Cam timing and piston to valve	Bigbeep	01/18/09 12:21 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 01:02 AM
Re: Cam timing and piston to valve	lewtot184	01/18/09 02:24 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 12:05 AM
Re: Cam timing and piston to valve	Anonymous	01/18/09 03:06 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 03:28 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 03:47 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:00 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 04:03 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 04:14 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:28 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 05:43 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 04:26 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 04:54 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:01 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:08 PM
Re: Cam timing and piston to valve	Anonymous	01/18/09 05:29 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:31 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:41 PM

Hop To