Cam timing and piston to valve

Print Thread

Re: Cam timing and piston to valve [Re: sixty9bee] #196412 01/18/09 12:26 PM 01/18/09 12:26 PM
Joined: Jan 2003 Posts: 16,930 NC 440Jim I Live Here
440Jim I Live Here Joined: Jan 2003 Posts: 16,930 NC	The best solution is the machine the exhaust valve reliefs in the pistons. But with a 110 LSA cam, I would not be afraid to install it with the intake lobe centerline at 104 ATC if needed, and you are willing to accept the trade offs.

Entire Thread
Subject	Posted By	Posted
Cam timing and piston to valve	sixty9bee	01/17/09 11:50 PM
Re: Cam timing and piston to valve	sixty9bee	01/17/09 11:54 PM
Re: Cam timing and piston to valve	SCATPACK 1	01/18/09 12:05 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 12:10 AM
Re: Cam timing and piston to valve	Bigbeep	01/18/09 12:21 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 01:02 AM
Re: Cam timing and piston to valve	lewtot184	01/18/09 02:24 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 12:05 AM
Re: Cam timing and piston to valve	Anonymous	01/18/09 03:06 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 03:28 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 03:47 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:00 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 04:03 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 04:14 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:28 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 05:43 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 04:26 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 04:54 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:01 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:08 PM
Re: Cam timing and piston to valve	Anonymous	01/18/09 05:29 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:31 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:41 PM

Hop To