I had to be sure

Print Thread

Re: I had to be sure [Re: Clanton] #1952716 11/17/15 01:01 AM 11/17/15 01:01 AM
Joined: Jan 2005 Posts: 1,466 malvern, ohio 3 3ddart pro stock
3ddart pro stock 3 Joined: Jan 2005 Posts: 1,466 malvern, ohio	I had a cylinder in a 360 block that looked like yours, but couldn't see the problem. I ended up putting some water in the block and took a propane torch to the rust area and low and behold it started blowing steam as there was a pinhole in the cylinder wall can 13

Entire Thread
Subject	Posted By	Posted
I had to be sure	Clanton	11/16/15 05:47 PM
Re: I had to be sure	StealthWedge67	11/16/15 06:22 PM
Re: I had to be sure	Clanton	11/16/15 06:24 PM
Re: I had to be sure	Crizila	11/16/15 06:26 PM
Re: I had to be sure	bonefish	11/16/15 06:32 PM
Re: I had to be sure	Clanton	11/16/15 06:32 PM
Re: I had to be sure	Sport440	04/08/16 02:33 AM
Re: I had to be sure	an8sec70cuda	11/16/15 06:49 PM
Re: I had to be sure	TRENDZ	11/16/15 08:24 PM
Re: I had to be sure	Clanton	11/16/15 10:08 PM
Re: I had to be sure	MadMopars	11/16/15 10:10 PM
Re: I had to be sure	Clanton	11/16/15 10:47 PM
Re: I had to be sure	3ddart	11/16/15 10:53 PM
Re: I had to be sure	Cheatham	11/16/15 11:02 PM
Re: I had to be sure	Clanton	11/16/15 11:23 PM
Re: I had to be sure	CHAPPER	11/17/15 03:30 AM
Re: I had to be sure	Clanton	11/17/15 04:12 AM
Re: I had to be sure	3ddart	11/17/15 05:01 AM
Re: I had to be sure	an8sec70cuda	11/17/15 03:30 PM
Re: I had to be sure	80fbody	11/18/15 03:26 PM
Re: I had to be sure	Clanton	11/18/15 07:25 PM
Re: I had to be sure	an8sec70cuda	11/18/15 07:45 PM
Re: I had to be sure	Clanton	11/18/15 07:54 PM
Re: I had to be sure	an8sec70cuda	11/18/15 07:57 PM
Re: I had to be sure	dizuster	11/18/15 07:56 PM
Re: I had to be sure	Clanton	11/18/15 08:16 PM
Re: I had to be sure	dizuster	11/19/15 02:34 AM
Re: I had to be sure	Clanton	11/19/15 03:32 AM
Re: I had to be sure	dvw	11/19/15 04:02 AM
Re: I had to be sure	Clanton	11/19/15 04:11 AM
Re: I had to be sure	Clanton	11/19/15 04:06 AM
Re: I had to be sure	dvw	11/19/15 04:16 AM
Re: I had to be sure	Clanton	11/19/15 04:23 AM
Re: I had to be sure	Clanton	04/08/16 02:20 AM
Re: I had to be sure	Clanton	04/08/16 02:36 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To