Breaking out old Upper Ball Joints

Print Thread

Re: Breaking out old Upper Ball Joints [Re: AlexP] #1950169 11/12/15 10:16 PM 11/12/15 10:16 PM
Joined: Jan 2003 Posts: 152 Worcester, Mass 6 68goldfish member
68goldfish member 6 Joined: Jan 2003 Posts: 152 Worcester, Mass	Before you try any method mentioned. Clean the area very well, and inspect the Ball Joint for tack welds. Not doing this is what caused me to twist my UCA into a pretzel. Last edited by 68goldfish; 11/12/15 10:21 PM.

Entire Thread
Subject	Posted By	Posted
Breaking out old Upper Ball Joints	AlexP	11/10/15 09:16 PM
Re: Breaking out old Upper Ball Joints	hemi71x	11/10/15 09:26 PM
Re: Breaking out old Upper Ball Joints	AlexP	11/10/15 09:28 PM
Re: Breaking out old Upper Ball Joints	Paul_Fancsali	11/10/15 10:21 PM
Re: Breaking out old Upper Ball Joints	VincentVega	11/10/15 10:23 PM
Re: Breaking out old Upper Ball Joints	Supercuda	11/10/15 10:24 PM
Re: Breaking out old Upper Ball Joints	hemi71x	11/10/15 10:33 PM
Re: Breaking out old Upper Ball Joints	VincentVega	11/10/15 10:25 PM
Re: Breaking out old Upper Ball Joints	AlexP	11/10/15 10:36 PM
Re: Breaking out old Upper Ball Joints	VincentVega	11/10/15 10:43 PM
Re: Breaking out old Upper Ball Joints	Supercuda	11/10/15 10:45 PM
Re: Breaking out old Upper Ball Joints	AlexP	11/10/15 10:48 PM
Re: Breaking out old Upper Ball Joints	kentj340	11/11/15 05:26 AM
Re: Breaking out old Upper Ball Joints	GY3	11/11/15 06:34 AM
Re: Breaking out old Upper Ball Joints	therocks	11/11/15 04:44 PM
Re: Breaking out old Upper Ball Joints	340challconvert	11/11/15 05:16 PM
Re: Breaking out old Upper Ball Joints	AlexP	11/11/15 07:31 PM
Re: Breaking out old Upper Ball Joints	MoparRoger	11/12/15 12:58 AM
Re: Breaking out old Upper Ball Joints	AlexP	11/12/15 04:25 AM
Re: Breaking out old Upper Ball Joints	68goldfish	11/13/15 02:16 AM

Hop To