Thanks all! especially the person who posted those pictures of the 64 what an awesome job you did.I also have been using bed liner for a couple o years now,nice to go through the frame at the torsion bar mount of the frame like you did, is what I would do cept that my floors are repaired already. Im doing this as an after thought of the floor repair. I have already templated the front rails and welded 1/8 inch plate on the three sides of the rail and installed new torque boxes. my rails were thin and not holey i reinforced them abit/ Just doing that I noticed a hugh improvement in the handling i can imagine what these frame connecters will do.Come on spring time,too cold now